How To Fix Sticky Triggers On Xbox One Controller

Introduction

This is a quick and easy guide (too my start i!) on how to repair/make clean sticky triggers (trigger buttons) on an Xbox One wireless controller. The guide has the model 1708 pictured but I know this works on the earlier Xbox One, One S, I X and the Elite controllers besides since they are very like with regard to the trigger button's function.

Make sure you have all the pieces you need before beginning: Plastic or metal mini pry bars for removing the covers, small cotton buds for cleaning and rubbing alcohol for the actual cleaning part.

Make sure you have all the pieces you need before outset: Plastic or metal mini pry bars for removing the covers, modest cotton buds for cleaning and rubbing alcohol for the actual cleaning part.
Have a make clean desk or workspace with good lighting and make sure you lot are non hunched over while working (this is applicative to all work environments!)
Remove the batteries and the cover console before doing any piece of work on the controller.

Using the pry bar, gently insert it near the base of the trigger to get under the plastic panel.

Using the pry bar, gently insert it nearly the base of the trigger to get nether the plastic panel.
And then, with a lever activity, slowly pry the panel off until you hear the plastic unsnapping from information technology's mounting.
You might find it easier to bandy between the front end and back of the console and then as to not harm the panel if it is particularly sticky/stubborn.

Clean the trigger contact pad with the cotton wool bud dipped in some rubbing alcohol. Be conscientious non to soak the cotton bud too much, you don't want information technology dripping liquid inside the controller.
Also, make clean the reverse surface on the underneath of the trigger key, the part that contacts the pad which is likely also sticky.
You tin can besides see how much dust or dirt is within the controller and in the cracks of the handles, might be a expert fourth dimension to tidy upwardly!

Replace the plastic panel by dropping it into place then firmly pressing downwards on the peak of the console until you lot hear the clicking of the footling clips inside.
Make sure it is properly reattached since there are a few clips inside which help to keep the panel in identify, you don't want this coming off once again!
This can exist done in the verbal same way for both triggers, since they are both under an identical plastic console and y'all tin practice this exact guide for both sides of the controller.

Conclusion

To reassemble your device, follow these instructions in contrary order: simply snap the back console(south) back into place, making sure they are firmly secured. Then reseat the batteries and encompass (or your equivalent) and savor happy gummy-free gaming.